News

News / article

Technology

← Back to news Back to homepage

2026. 10. 17.

CMF Speakers Support 3D-Printed Knobs and Panels

1 min read

Nothing’s CMF Speaker S and M support custom 3D-printed replacement panels and knobs.

What is new?

The Speaker S and Speaker M allow owners to customize front panels and controls. The manufacturer has published STL models, enabling users to create their own variations and potentially replace damaged parts without replacing the entire speaker.

3DPS perspective

Real-world suitability should be evaluated against production, cost and reliability data as these become available.

Source: Original report and cover-image reference.

2026. 10. 18.

HEATER CONTROL: from temperature monitoring to visually programmable heating control

HEATER CONTROL began with two temperature sensors and a local display. Its development now includes a browser interface and a checked communication link, with configurable hardware assignment and a block-based rule editor forming the next steps.

2026. 10. 16.

ESA Returns the First Metal 3D-Printed Thrusters Made on the ISS

The European Space Agency has brought its fifth metal-printing sample from the International Space Station back to Earth. For the first time, the returned set includes small thrusters intended for satellite propulsion.

2026. 10. 16.

Musk Has Lost His Marbles… And Now They've Taken Flight!

Elon Musk’s new Roadster drove upside down, briefly took flight and demonstrated extraordinary acceleration. Engineering brilliance—or a boss’s joke turned into an assignment?

2026. 10. 14.

Bambu Lab Patent Application Describes a New Heated-Bed Design

Shenzhen Tuozhu Technology, Bambu Lab's parent company, has described a heated-bed design in a U.S. patent application intended to improve heat distribution across the build plate.

Earlier news

92 earlier article(s)

Prusament PLA Lightweight: foaming PLA for lightweight parts

2026. 10. 03.

New materials

Prusament PLA Lightweight: foaming PLA for lightweight parts

Prusa says its new foaming PLA can produce prints up to 65% lighter, targeting RC models, drones and other weight-sensitive parts.

Read

KLS Martin and Lithoz: nearly 500 patient-specific bioceramic implants

2026. 10. 02.

New materials

KLS Martin and Lithoz: nearly 500 patient-specific bioceramic implants

Patient-specific LithaBone TCP implants made with Lithoz LCM technology are now a standard ordering option on KLS Martin’s IPS Gate platform.

Read

Impossible Objects: $40 million to scale CBAM industrial manufacturing

2026. 10. 02.

Industrial applications

Impossible Objects: $40 million to scale CBAM industrial manufacturing

Impossible Objects raised $40 million in Series B funding to scale its composite-based CBAM manufacturing technology.

Read

Tesseract: linear motors could replace belt drives in 3D printers

2026. 10. 01.

New materials

Tesseract: linear motors could replace belt drives in 3D printers

Dutch startup Tesseract Technologies is developing a linear-motor and closed-loop control system, with a commercial launch planned for Q1 2027.

Read

Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One

2026. 10. 01.

Technology

Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One

Commodore.net has officially relaunched its legendary home computer as the Commodore 64 Ultimate, rebuilding the classic machine on modern FPGA hardware. We cover it here as a curiosity: it has no direct 3D printing angle, since the case is produced with classic injection molding using the original 1986 tooling, not 3D printing.

Read

LLNL: AI detects defects during 3D printing

2026. 10. 01.

Software / AI

LLNL: AI detects defects during 3D printing

Lawrence Livermore National Laboratory is using camera-based AI inspection to analyze direct ink writing layer by layer and detect defects during the build.

Read

MINGDA: a complete 3D printing workflow at SIGN CHINA 2026

2026. 10. 01.

Technology

MINGDA: a complete 3D printing workflow at SIGN CHINA 2026

MINGDA presented a signage workflow covering 2D graphics, 3D preparation, multi-color printing and post-processing.

Read

OTR3DLab: full-scale tire and wheel prototypes by 3D printing

2026. 09. 30.

Industrial applications

OTR3DLab: full-scale tire and wheel prototypes by 3D printing

OTR Engineered Solutions’ new OTR3DLab service targets rapid production of full-scale tire and wheel prototypes for vehicle testing.

Read

AML3D: 3D-printed copper-nickel components for a U.S. submarine program

2026. 09. 30.

Software / AI

AML3D: 3D-printed copper-nickel components for a U.S. submarine program

Australian company AML3D received an initial production order worth about A$500,000 for high-pressure copper-nickel components from Austal USA Advanced Technologies.

Read

Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System

2026. 09. 28.

New printers

Flashforge CJ270: Full-Color Material Jetting in a Desktop-Sized System

Flashforge is positioning the CJ270 as a compact desktop 3D printer designed for high-resolution color printing. According to the manufacturer, the system supports more than 10 million colors and offers a minimum layer thickness of 7 μm. Flashforge is also promoting an additional €450 early-bird benefit for early customers.

Read